	GAL / PAL logic analysis software

Type "PB" after the carriage began to run this software. 

In addition to individual suggesting the need for human intervention, 
but this software can be fully automatic operation, given the analytical results 

This software will parse the results stored in the RST. PLD and RST. ABL in 
Anko want to copy the chip, required FM.EXE or ABEL compiled into RST. JED 
files, and then burn GAL chip programmer. 

This software can parse simple combination, feedback combination, simply 
register type of chip, for more complex or oscillator, three-state gate control, 
asynchronous registers, state machine model of the chip, the analytical results 
may be incorrect, and should be transferred solved by other means, do not 
waste too much time. 

The software can run on 286 and above models, the pre-disk free space s
hould be greater than 20M. 

Analytical software some tips explanation:

1. hardware error the software can automatically diagnose the existence of 
universal programmer or not, suggesting that this error is usually not there.

2.hardware address error 
The software can automatically diagnose universal programmer address settings, 
suggesting that this error is usually universal programmer address is not 2ED / 3BC

3. the device error 
The software can automatically diagnose chip is good or bad, suggesting that this 
error is usually a bad chip or type special.

4.GAL16V8, GAL20V8 
The software can automatically diagnose chip pin count, GAL20V8 refers to the 
24-pin chip, while the actual chip may be GAL20V8, PAL20V8, PAL20L8 etc; 
GAL16V8 refers to the 16-pin chip, while the actual chip may be PAL16V8, 
PAL18V8, PAL16P8 more.

5.no any device on socket 
The software can automatically diagnose the presence or absence chip, 
suggesting that this error is usually a bad chip or scratched.

6. the device has oscillator 
The software can automatically diagnose whether the existence chip oscillator mode, 
suggesting that this information, usually there is a chip oscillator mode, the analytical 
results may be inaccurate.

7. the device is special 
The software can automatically diagnose whether the presence of the chip state 
machine model, suggesting that this information is usually stateful mode chip, 
when parsing longer equation the results may be inaccurate.

8. the device has registers 
The software can automatically diagnose whether the chip exists register mode, 
suggesting that this information is usually there in the chip register mode, 
when parsing longer equation the results may be inaccurate.

9. the device has no output 
The software can automatically diagnose whether the presence of the chip output, 
suggesting that this information is usually the chip is blank.

10. Please select PLD Modle: 1.: S 2: C 3: R 

This software can be manual intervention to resolve mode within three seconds 
of this message, artificial choice, artificial selection analysis software will run, 
otherwise it will automatically select 1 or 3. 
- 1: simple combination
- 2: feedback combination
- 3: Register type

11. the device too complex 
The software can automatically parsed chip diagnostic difficulty, suggesting that 
this information is usually more complex or chip oscillator.

