GQ-3X True USB Willem programmer resources page

******

True-USB Willem programmer(GQ-3X) PRG-028

Hardware Features:

Utilize USB port for data communication & power supply
Significantly increase the speed up to 20 times faster than print port willem programmers
Eliminate the DB25 LPT printer extension cable (data cable)
Support most of popular devices:EPROM EEPROM Flash PIC ,AVR and more
The programmer uses on board MCU timer to operate the target chip, so it works much more stable than existing printer port Willem programmer
Eliminated all DIP and jumpers on board. User no longer need to worry about the jumper settings. Fully utilize the ZIF socket. All chips will use ZIF socket now, such as 93CXX/24XX/25XX EEPROMs, AVR chips and PIC16F628A, PIC12F508 etc.(ICSP header also available for ISP and for PIC DIP28 DIP40 on PIC Adapter).
Dual Power (USB/DC) supply capability.External DC input jack for using a un-powered USB hub or port. Programmer will do the automatic switching between USB power and external Power
Vcc automatically selected by software among: 3.6V, 5V, 5.5V, 6.2V
Vpp automatically selected by software among 3.6V, 12V, 12.7V, 15V, 21V, 25V
On board dual power management will let user to control the different Vpp and Vcc voltage independently during the programming, verification, blank checking and reading operation batch process
Fixed all hardware design issues in Enhanced Willem. Improved the voltage management from GQ-2X model.
Hardware backward compatible with printer port Willem EPROM Programmer
Accomadate the existing Willem programmer adapters: like TSOP48/32,16bit EPROM, MCS-51+, PIC+ adapter,SOIC adapter and so on
Hardware model: GQ-3X
USB 1.1 & 2.0 port compatible

It needs a driver which could be downloaded and a 9 - 12 Volt powersupply


<Click on image to enlarge>

 

 

http://www.ezt.gr/GQ-3X.rar (Software archive)

 

 

If you look forward for other information about this topic, do not hesitate to contact me by e-mail at: matthieu.benoit@free.fr .
Important Notice: Also if you have any data about this topic, do not hesitate to contribute to this page.

Si vous recherchez des informations pour ce sujet, vous pouvez me contacter par e-mail : matthieu.benoit@free.fr . De même si vous avez des informations sur ce sujet, n'hésitez pas à contribuer à cette page.


Retour au sommaire

Retour à la Page d'accueil

M-à-j: 18 avril, 2022.

matthieu.benoit@free.fr