REVELPROG-IS serial programmer for EEPROM, FLASH, FRAM resources page
Serial memory programming in:
car electronics & automotive (reprogramming modules, radio-code, immobilizers,
gps navigations, mileage correction and other modules with serial EEPROM and/or
FLASH memories),
computer and notebook service (data recovery, reflashing, upgrading and programming
BIOS chips in motherboards, copier & fax machines, printers, hdd & ssd
sata drives etc. ),
network service (programming and cloning optical and ethernet SFP, QSFP, XFP
modules),
RTV/AGD maintaining or repairing (TV, digital cameras, tv tuners etc.),
and many other devices equipped with serial IIC / SPI / Microwire EEPROM and
SPI FLASH chips.
Main features:
reading / writing / erasing functions with user-friendly application interface,
supported binary files (*.bin, *.rom, *.epp etc.) and Intel-Hex (*.hex) with
possibility to load file to the buffer, edit it, calculate checksums, export
changes as patterns, swap-bytes, compare with chip etc.),
programming in socket or in external circuit (without unsoldering the chip -
in system programming ISP),
the target application device can be either powered by REVELPROG (possibility
to change VPP and logic levels: 1.0V / 1.5V / 1.8V / 2.5V / 2.8V / 3.3V / 5.0V)
or powered by an application with external power supply (1.0 – 5.5V),
build in additional protection: buffered I/O pins internal connected only during
programming + short circuit and overload protection (reduces the risk of damaging
parts due to connection mistake),
all I/O internal-connected only during programming,
additional useful tools such as: user patterns, script programming (i2c &
spi bus pirate), checksums, auto backups, file comparing (DiffChecker) etc.
integrated sockets (ZIF + SOIC) with auto adaptive I/O pins reduces requirement
of additional adapters,
short programming time , e.g. WINBOND W25Q80BV (8Mb): read 0.9s (8,4Mb/s), write
3.3s (2,4Mb/s), MICRON N25Q128A (128Mb): read 12.8s (10Mb/s), write 37.6s (3,4Mb/s),
please check video programming examples
software and firmware upgrades are freely available for all users on the Internet.
EEPROM, FLASH, FRAM true USB programmer
compatible protocols: IIC (I2C), SPI, 1-WIRE and MICROWIRE (uWire),
supported device with 1.0V – 5.0V power supply,
power supply and communication via USB 2.0 (hardware level, bulk transfer),
programming with external power supply (1.0 - 5.5V),
programming with internal power supply (1.0 - 5.0V, Imax = 100mA),
operation speed (read/write) up to 10Mbit/s,
ZIF-32 + SOIC-8 (150mil) integrated sockets,
connector for in-circuit serial programming (ICSP) with buffered I/O,
auto adaptive I/O pins connected only for programming time (Hi-Z in IDLE state),
all I/O connected only for programming time (Hi-Z in IDLE state),
short circuit and overload protection,
software compatible with Windows XP, Vista, 7, 8 and 10 (32 and 64-bit),
device designed & manufactured in EU, made in Poland.
devices list (PDF - 11 pages
- 97Kb)
software download
https://www.reveltronics.com/en/products/revelprog-is-serial-memory-programmer-usb#software
EON EN25F80-100QCP 8 Megabit
Serial Flash Memory with 4Kbytes Uniform Sector
bios Asus P5KC motherboard bios programming with Revelprog-is programmer
25Q256JVEN
If you look forward for other information about this topic, do not
hesitate to contact me by e-mail at: matthieu.benoit@free.fr
.
Important Notice: Also if you have any data about this topic, do not hesitate
to contribute to this page.
Si vous recherchez des informations pour ce sujet, vous pouvez me contacter par e-mail : matthieu.benoit@free.fr . De même si vous avez des informations sur ce sujet, n'hésitez pas à contribuer à cette page.
M-à-j: 3 novembre, 2024 .