Leap Electronics EP-1 EPROM programmer resources page
EP271.zip (ZIP - 183Kb) Software to be used with the EP-1 programmer
leap.zip
(ZIP- 265Kb) Software release 2.7 and 2.71 to be used with the EP-1 programmer
with this configuration of the ISA card RM-3 hereafter
Leap EP1 User's Manual (PDF - 22 pages - 1.01 Mb)
E/EPROM Program V2.71 E/EPROM PROGRAMMER CARD MODEL EP-1
parameter
device information
ISA Card to be used with this programmer:
high resolution photos of the pcb of the RM-3 interface
in order to draw the schematic of the ISA card RM-3
RM-3_interface_components1.jpg
RM-3_interface_components2.jpg
RM-3_interface_solder_side1.jpg
RM-3_interface_solder_side2.jpg
*******
If you look forward for other information about this Programmer,
do not hesitate to contact me by e-mail at: matthieu.benoit@free.fr
.
Important Notice: Also if you have any data about this programmer, adapter diagrams,
do not hesitate to contribute to this page.
Si vous recherchez des informations pour ce programmateur, vous pouvez me contacter par e-mail : matthieu.benoit@free.fr . De même si vous avez des informations sur ce programmateur, n'hésitez pas à contribuer à cette page.
18 avril, 2022