Programming Adapter ADP-MACH1 AMD MACH130 / MACH230 / MACH435 (84 PINs PLCC) diagram for programmer HILO ALL03 /ALL07

(click to enlarge)

Original notes (PDF - 8 pages - 1.44Mb)

schematics (PDF-1page- 25Kb)

AMD MACH130 Data sheet

AMD MACH230 Data sheet

ALL03 Programmer This adapter allows you to program the following chips on an ALL03 Programmer using the file amach1.exe : MACH130, MACH230, MACH220, MACH435, MACH445/Q, MACH131, MACH231, MACH355/Q, MACH465/Q, MACH221, MACH231SP, MACH231/1, MACHLV466, MACH466, MACH131SP and MACH131/1.

If you use an ALL07 Programmer, this adapter allows you to program the following chip using file amach1.exe : MACH130, MACH230, MACH120, MACH220, MACH435, MACH435/Q, MACH131, MACH231, MACH355/Q, MACH465/Q, MACH221, MACH231SP, MACH231/1, MACHLV436, MACH436, MACHLV446, MACH446, MACHLV466, MACH466, MACH131SP, MACH221SP, MACH221/1, MACH231SP-VC, MACH131SP-VC, MACH221SP-VC, M4LV-128/64-VC, M4-128/64-VC, M4LV-128N/64-JC, M4-128/64-YC, M4LV-128N/64-JC, M4LV-128/64-YC, M4LV-256/128-YC, M4-256/128-YC, M4LV-96/48-VC, M4-96/48-VC, M4LV-192/96-VC and M4-192/96-VC.

Connections:

84 Pin PLCC Socket Signal Name DIP40 of the ALL03 / ALL07 Comments
1 GND 20
2 VCC 9
3 10K Pulldown R -
4 10K Pulldown R -
5 10K Pulldown R -
6 10K Pulldown R -
7 10K Pulldown R -
8 10K Pulldown R -
9 10K Pulldown R -
10 SI/O7 25
11 GND 20
12 SI/O8 26
13 10K Pulldown R -
14 10K Pulldown R -
15 10K Pulldown R -
16 10K Pulldown R -
17 10K Pulldown R -
18 10K Pulldown R -
19 SI/O15 1
20 CLK1 pin 4 IC 74LS14
21 VCC 9
22 GND 20
23 VPP center pin SW1-2 if MACH1 shorted to 13 if MACH435 shorted to 37
24 SI/O16 2
25 SI/O17 5
26 10K Pulldown R -
27 10K Pulldown R -
28 10K Pulldown R -
29 10K Pulldown R -
30 10K Pulldown R -
31 SI/O23 27
32 GND 20
33 SI/O24 28(corrected)
34 SI/O25 24(corrected)
35 10K Pulldown R -
36 10K Pulldown R -
37 10K Pulldown R -
38 SEC 19
39 10K Pulldown R -
40 10K Pulldown R -
41 ENABLE center pin Switch SW1-1 if MACH1 shorted to 37 if MACH435 shorted to 13
42 VCC 9
43 GND 20
44 VCC 9
45 10K Pulldown R -
46 10K Pulldown R -
47 10K Pulldown R -
48 10K Pulldown R -
49 10K Pulldown R -
50 10K Pulldown R -
51 10K Pulldown R -
52 SI/O39 29
53 GND 20
54 SI/O40 30
55 10K Pulldown R -
56 10K Pulldown R -
57 10K Pulldown R -
58 10K Pulldown R -
59 10K Pulldown R -
60 10K Pulldown R -
61 SI/O47 3
62 CLK2 34
63 VCC 9
64 GND 20
65 MD1 17
66 SI/O48 4
67 10K Pulldown R -
68 10K Pulldown R -
69 10K Pulldown R -
70 10K Pulldown R -
71 10K Pulldown R -
72 10K Pulldown R -
73 SI/O55 31
74 GND 20
75 SI/O56 32
76 10K Pulldown R -
77 10K Pulldown R -
78 10K Pulldown R -
78 10K Pulldown R -
79 10K Pulldown R -
80 10K Pulldown R -
81 10K Pulldown R -
82 10K Pulldown R -
83 MD2 18
84 VCC 9
10nF cap. between pin 13 and pin 20
pin 1 IC 74LS14 33
pin 2,3 IC 74LS14 shorted together  
pin 4 IC 74LS14 20  
pin 7 IC 74LS14 20
pin 14 IC 74LS14 7
100 nF cap. between pin 14, 7 IC 74LS14  
100nF cap. between 1,2 ; 21,22 ; 42,43 ; 63,64  
100 nF cap. between pin 9,20
10 uF/25V tantale between pin 9 (+) and pin 20 (-)
 

 

 

the Switch is composed of 6 connexions : the switch allows you to change from MACH1 position to MACH435 position:

SW1-1 o o o as so 40pin pin 37 --- plcc pin 41 --- 40pin pin 13

SW1-2 o o o as so 40pin pin 13 --- plcc pin 23 --- 40pin pin 37

MACH1 position of the switchs shorts pin37 to pin 41(plcc) and pin13 to pin 23(plcc) ; MACH435 position of the switch shorts pin 41(plcc) to pin 13 and pin 23(plcc) to pin 37.

HILO ADP-MACH for PLCC-44 Mach Devices

Hilo All-03 ADP-MACH to program PLCC-44 MACH Devices MACH110, MACH210/A/AQ, MACH215, MACHLV210/A, MACH111, MACH211, MACH211SP

 

Adapter ADP-MACH2 to program PLCC68 Mach devices MACH120 / MACH220

ADP-MACH2 Adapter schematics (PDF- 294Kb)


Back to ALL03 Resource Page

Back to ALL07 Resource Page

If you have any comments or resources do not hesitate to contact me by email at matthieu.benoit@free.fr

Email: matthieu.benoit@free.fr

Last Update : 12 janvier, 2015