uses an ISA interface to connect to the PC

 

Hilosystems EPP-01C programmer
Programmateur EPP-01C Hilo

EPP-01C Hilo resources page


P/N: 05-1001 PCB-EPW512C


P/N: 05-100 PCB-EPM-512W © 1992-A

 

 

EPP-01C:
ISA interface model: EPW512
software: EPW512.EXE and others

hilo epp-01c (ZIP archive - 141Kb)

You may see also :


HI-LO SYSTEM RESEARCH EPP-04 E(E)PROM PROGRAMMER


 

 

Modular Circuit Technology Eprom Programmer MOD-MEP-4

The CSA-03 from Hi-Lo Systems is the original ISA interface for the MCT MOD-MEP-4 (proving that Hi-Lo was the OEM)

 

 

Software Archive Modular circuit Technology MOD-MEP4 programmer (ZIP - 73Kb)

it is recommanded to put an heatsink as on photo hereafter

The modified board pulled from one of my programming systems to show the heat sink modification that I made to all of the cards I use.
I found the original heat sinks on these cards to be marginal. They are adequate under light use, but under repeated use, the boards get much too hot. The temperature of the regulator can approach 70 degrees C (it's maximum operating temperature).
With the much larger heat sink, elevated off the board, pulling the heat away from the PCB and providing extra air circulation, the temperature stays below 40 degrees C.

 

Hilo SEP-8x archive includes SEP-81, SEP-84, SEP-88 April 18 1990 Archive (ZIP- 146Kb)

REVISION of EPROM Programmer SEP-8x

The software in this diskette can only be executed on IBM PC/XT/AT
or compatible PC

REVISION BOARD:
--------------
V1.00 : 1st released in Jan. 1990.

 

Software for the EPP-04 programmer available in archive EPP01.rar (RAR archive- 794 Kb)

includes :

48P-01.EXE

DASM48.EXE

DMT-01.EXE

EPP-01.EXE

EPP-04.EXE

EPP-08.EXE

EPP-16.EXE

HEXOBJ.EXE

1. The new EPP-1 have a self timer and can scan the I/O port of Common
System Adapter ,so no need SETUP.EXE file contained in disk.

2. The full series of TEK-TOOLS are listed below.

INTELLIGENT : programming voltage & timing are auto-changed
with manufacturer or type selection.
EASY TO USE : menu driven function.
ECONOMIC : models are exchangeable (common system adapter).
SAFE : all models have short-circuit protection.
POWERFUL : almost all types of ICs are available.

|--------|--------------------------------|----|
| MODEL | I T E M |GANG|
|--------|--------------------------------|----|
| BPP-01 | BPROM PROGRAMMER | 1 |
|--------|--------------------------------|----|
| PAP-01 | PAL PROGRAMMER | 1 |
|--------|--------------------------------|----|
| EPP-01 | E(E)PROM PROGRAMMER | 1 |
|--------|--------------------------------|----|
| EPP-04 | E(E)PROM PROGRAMMER | 4 |
|--------|--------------------------------|----|
| EPP-08 | E(E)PROM PROGRAMMER | 8 |
|--------|--------------------------------|----|
| 48P-01 | 8748 PROGRAMMER | 1 |
|--------|--------------------------------|----|
| 48P-04 | 8748 PROGRAMMER | 4 |
|--------|--------------------------------|----|
| 48P-08 | 8748 PROGRAMMER | 8 |
|--------|--------------------------------|----|
| 51P-01 | 8751 PROGRAMMER | 1 |
|--------|--------------------------------|----|
| DMT-01 | DIGITAL IC & MEMORY TESTER | 1 |
|--------|--------------------------------|----|



HILO E(E)PROM PROGRAMMER MODEL: EPP-01

WITH INTERFACE CARD ISA CSA-04

 

Software archive EPP01.rar (RAR archive- 794 Kb)

EPP-01CE:
ISA interface model: SAC-201B , SAC-201B_2
software: have to "extract" from an old 5,25" disc.
http://data.matthieu.benoit.free.fr/all03/epp-01ce/EP1C-118.zip

Hilosystem EPP-01AE Quick Eprom Programmer

 

EP1A_119.zip (Software to be used with EPP-01AE / SEP-81AE programmer)



Software Release 1.12 (RAR Archive- 154Kb)

EPROM programming voltages (PDF - 7 pages - 530Kb)

 

ISA interface model SAC-201CE



SEP-81AE Quick Eprom Programmer



User's Manual SEP-81AE /84AE ; EPP-01AE /04AE/01CE
(PDF- 34 pages -1.68Mb)

Hilosystems Catalog '94 /95 (PDF-10 pages - 6.61Mb)

 

Hi-lo systems EPP-04AE Quick Eprom Programmer

I think this programmer must be connected to a SAC-201 ISA Card; unfortunately I have not the software.

 

USER'S MANUAL EPP-01A/04A/08A PC-BASED EPROM PROGRAMMER (PDF-37 pages - 17.67Mb )

difference between EPP-01A and EPP-01C (PDF- 1 page-327Kb)

devices lists adaptors and socket converters (PDF- 12 pages -4.15Mb)

software EPP-01C V3.03 512K High Speed Eprom Writer (.7z archive- 64Kb) issued date : Feb 05 1993

hi-lo systems catalog 1992/1993 (PDF- 11 pages - 4.95Mb)

hilo systems Adapters for programmers (PDF- 11 pages - 4.55Mb)

isa card epp-01c

programmer socket

 

 

 

 

 

******

 

If you look forward for other information about this Hilo EPP-01C Programmer, do not hesitate to contact me by e-mail at: matthieu.benoit@free.fr . Also if you have any data about this programmer, do not hesitate to contribute to this page.

 

Si vous recherchez des informations pour ce programmateur Hilo EPP-01 , vous pouvez me contacter par e-mail : matthieu.benoit@free.fr . De même si vous avez des informations sur ce programmateur, n'hésitez pas à contribuer à cette page.

Retour au sommaire

Retour à la Page d'accueil

17 avril, 2020

matthieu.benoit@free.fr